0
Owner's of the Audiovox Car Stereo System Rampage gave it a score of 0 out of 5. Here's how the scores stacked up:
the band in use. The unit will stop at each
pre-set station for 10 seconds before continu-
ing to the next pre-set station (the frequency
on the display panel will flash during Pre-Set
Scan operation). Press the button again
momentarily to stop Pre-Set Scan operation
and remain on the selected frequency.
Pressing the button for longer than 2 sec-
onds will activate the Auto-Store Tuning fea-
ture. The radio will automatically scan the band
in use and enter strong local stations into
the pre-set memory positions for that
band. LOC will appear on the display as
tuning occurs. If you have already set the
pre-set memories of that band to your favor-
ite stations, activating the Auto-Store Tun-
ing feature will erase those stations and
enter the new stronger stations. This fea-
ture is most useful when traveling in a new
area where you are not familiar with the lo-
cal stations.
bnbn
bnbn
bn STATION PRE-SET MEMORIES
To manually set any of the 6 pre-set memory
buttons, use the following procedure:
1. Turn the unit on and select the desired band.
2.Select the first station to be pre-set
using the TUNE/TRK buttons.
3.Press and hold the pre-set button to
be set for approximately 2 seconds.
The pre-set number CH 1-6 will appear
on the display, indicating the station is
now set into the memory position of that
pre-set button and can be recalled at any
time by momentarily pressing that button.
4.Repeat the above procedure for the
remaining 5 pre-sets on the band in use
and for the other 4 bands of the unit.
bobo
bobo
bo FM STEREO/LOCAL (LOC) INDICATIONS
The unit receives both stereo and monaural
signals. During FM radio operation, the unit
is usually receiving a stereo signal as indi-
cated by the stereo icon (
) on the dis-
play. If a stereo signal is too weak for com-
fortable listening, the stereo indication will ap-
pear intermittently or not at all; if an AM or monau-
ral signal is received, the icon will disappear
from the display panel.
bpbp
bpbp
bp LIQUID CRYSTAL DISPLAY PANEL
The Liquid Crystal Display (LCD) panel displays
the frequency, time, and activated functions.
NOTE: It is a characteristic of LCD panels that, if
subjected to cold temperatures for an
extended period of time, they may take
longer to illuminate than under normal
conditions. In addition, the visibility of
the numbers on the LCD may slightly
decrease. The LCD readout will return
to normal when the temperature increases
to a normal range.
bqbq
bqbq
bq FUNCTION DISPLAY
The Function Display consists of a single bar
graph which displays a bar graph which provides
a visual representation of the audio signal power
level.
As the volume is increased, the number of
illuminated segments will increase.
br br
br br
br DISC SLOT
With the label surface facing up, gently insert each
disc into the slot until the soft-loading mecha-
nism engages and draws the disc into the player.
The number of discs loaded will appear both on the
front panel display disc icon (flashing white segment)
and on the DISC INF display on the rear of the front
panel. The discs will be loaded in order beginning
with the number (1-5) currently displayed. Disc play
will begin when the CDC button is pressed; and play
will start with track 1 on the last disc loaded, unless
another disc is selected using the DISC SEL
button on the front side of the panel.
NOTE: This unit is designed for play of standard
5" (12cm) Compact Discs
ONLY. Do not
attempt to use 3" (8cm) CD-Singles in
this unit, either with or without an adap-
ter, as damage to the player and/or disc
can occur. Such damage will not be cov-
ered by the Warranty on this product.
88
88
8
OPEROPER
OPEROPER
OPER
AA
AA
A
TT
TT
T
ING INSTRUCING INSTRUC
ING INSTRUCING INSTRUC
ING INSTRUC
TT
TT
T
IONSIONS
IONSIONS
IONS
Find Your Products By Category
Please Login
