0
Owner's of the Cable Electronics Headphones MP50A gave it a score of 0 out of 5. Here's how the scores stacked up:
Composite S-Video
Video
Stereo Audio
Chapter 2 - System Setup
Find a suitable place for your MP50A, within 1.4m/4.6ft of your TV screen, panel or
LCD display. Connect the power supply to your device and the power outlet.
Included with your MP50A are a standard video cable with
RCA connectors and an S-Video cable. Plug in the RCA
connector to the video output connector on the MP50A and
connect it to your screen.
For better video quality, we recommend using the S-Video cable
and S-Video connector instead of the yellow RCA connector. For
LCD displays, an optional VGA cable is also available.
For audio output, use the red and white RCA connectors.
Connect this cable to the audio output on your MP50A and
plug it into your TV, external speakers or sound system.
Once you have connected all cables, you are ready to turn on the
power switch. Wait a few seconds for the system to boot, then
use the remote control to navigate and control the device.
If the screen stays blank, press the OUTPUT key on your remote control to toggle
through the different video channels until you nd the correct one.
To change between PAL and NTSC TV systems, press the SETUP button on your remote
control and change the TV Type under Preferences.
To prevent any accidental change of the video output, you can lock your settings. To do this,
press the SETUP key, go to Preferences, press the FAST FORWARD key once to unlock
the menu and then select Output Lock. Turn it ON by selecting your preferred output and
clicking ENTER to save it.
If you are using this device for the rst time, set
the correct time by going to the setup menu
and pressing the Disp key on your remote
control.
Set the time using the virtual keyboard and
press OK to save the settings. You can select
CANCEL or press the Disp key to skip the
following settings at this time.
Page 4 / Chapter 2 - System Setup
MP50A User Guide
Find Your Products By Category
Please Login
