5.0
Owner's of the Clarion Car Stereo System DB566USB gave it a score of 5.0 out of 5. Here's how the scores stacked up:
11
English
DB566USB
MP3/WMA/USB Mode:
Main-1 display
(
Track No., play time
)
Main-
2 Display
(
Folder No., Track No.
)
Title
Display Clock Display Main-1 Display...
∗ Once selected, the preferred display becomes the
display default. When a function adjustment such
as volume is made, the screen will momentarily
switch to that functionʼs display, then revert back
to the preferred display several seconds after the
adjustment.
Switching the display
Press the
[
D
]
button to select the desired display.
Each time you press the
[
D
]
button, the display
switches in the following order:
Note: Be sure to read this chapter referring to the front diagrams of
chapter “4. CONTROLS” on page 5.
8. OPERATIONS
CAUTION
!
Basic Operations
Be sure to lower the volume before switch-
ing off the unit power or the ignition key. The
unit remembers its last volume setting. If
you switch the power off with the volume up,
when you switch the power back on, the sud-
den loud volume may hurt your hearing and
damage the unit.
Turning on/off the power
Note:
Be careful about using this unit for a long time
without running the engine. If you drain the carʼs
battery too much, you may not be able to start the
engine and this can reduce the service life of the
battery.
1. Press the
[
SRC
]
button.
2. The illumination and display on the unit light
up. The unit automatically remembers its last
Operation mode and will automatically switch
to display that mode.
3. Press and hold the
[
SRC
]
button for 1 second
or longer to turn off the power for the unit.
Selecting a mode
1. Press the
[
SRC
]
button to change the Opera
-
tion mode.
2. Each time you press the
[
SRC
]
button, the Op
-
eration mode changes in the following order:
Radio mode CD/MP3/WMA mode
(
USB mode
)
AUX mode Radio
mode...
Notes:
If the CD mode is selected when no disc is inserted,
the display shows “NO DISC”.
If no USB drive is inserted, USB mode will not be
displayed.
Radio/CD Mode:
Main display Clock display Main display
Adjusting the volume
Turning the
[
ROTARY
]
knob clockwise increases
the volume; turning it counterclockwise decreas
-
es the volume.
∗ The volume level is from 0
(
minimum
)
to 33
(
maxi-
mum
)
.
Audio mode adjustments
1. Press the
[
A-M
]
button to select the Adjustment
mode. The mode switches as follows each time
the
[
A-M
]
button is pressed:
BASS TREB BAL FAD Previous
mode
2. Turning the
[
ROTARY
]
knob to adjust the
selected Audio mode.
BASS
(
Bass
)
: Adjustment range :
-
7 to
+
7
TREB
(
Treble
)
: Adjustment range :
-
7 to
+
7
BAL
(
Balance
)
: Adjustment range : L13 to R13
FAD
(
Fader
)
: Adjustment range : F12 to R12
∗ The display returns to the previous mode 7
seconds after the adjustment.
Note:
Bass and Treble can only be adjusted when the
“Z-Enhancer” is off.
Find Your Products By Category
Please Login
