0
Owner's of the 4XEM Security Camera gave it a score of 0 out of 5. Here's how the scores stacked up:
- 51 -
Camera is doing auto panning.
“Enable IR control” Checking this box allows the Administrator to enable the IR
controller to move the aim of the camera. To allow controls only through URL
commands or web pages, leave this box unchecked.
“Zoom times display” Checking this box allows the Administrator to display the zoom
magnitude on the transmitted video. The information is described as the following
table:
Text displayed Meanings
Zoom X3 3 times optical zoom, the focal lens equals to 12.6 mm.
Zoom X10 xE2 10 times optical zoom, the focal lens equals to 84 mm.
“Patrol selection” After the User has saved a list of preset positions, the “Preset
locations” box will also keep a list of the preset positions. And once the “Select>”
button is clicked, the “Selected location” box will keep a list of the patrol stops. The
“Remove” button removes the preset position from the patrol stops. The “UP”, “DOWN”
buttons adjust the order of the patrol stops. Several preset positions can be added to
the patrol stops. The camera can accept up to 20 patrol stops.
“Save” button
The button is valid for “Pan speed”, “Tilt speed”, “Tilt speed”, “Auto pan/patrol speed”,
“Enable IR control”, “Dwelling time” and “Patrol selections”. In other words, after
changing these settings, and the “Save” button is not clicked, the new setting of the
camera will not take effect.
Find Your Products By Category
Please Login
