4XEM Security Camera User Manual

0

Out of 0 Ratings

Owner's of the 4XEM Security Camera gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 89
 
- 65 -
[nosync=<value>&]<parameter>=<value>
[&<parameter>=<value>…][&return=<return page>]
parameter value description
nosync
0, 1 Specifies that there should be no sync (write) of
the corresponding configuration file on flash. If
parameter is omitted, a sync write will occur.
(note: this parameter must be put at begin o
f
parameter list)
<group>_<name>.
value to assigned Assign <value> to the parameter
<group>_<name>..
return
<return page> Redirect to the page <return page> after the
parameter is assigned. The <return page> can be
a full URL path or relative path according the the
current path. If you omit this parameter, it will
redirect to an empty page.
(note: The return page can be a general HTML
file(.htm, .html) or a server script executable
(.vspx) file. It can not be a CGI command. It can
not have any extra parameters. This parameter
must be put at end of parameter list)
Example: Set the IP address of server to 192.168.0.123
http://myserver/cgi-bin/admin/setparam.cgi?Network_IPAddress=192.168.0.123
Available Parameters on the Server
Group: System
NAME VALUE DESCRIPTION
hostname
(r/w)
<text string shorter
than 15 characters>
host name of server
0 Do not turn of the led indicator ledoff
(r/w)
1 Turn off the led indicator

   Find Your Products By Category