0

Out of 0 Ratings

Owner's of the American Audio DJ Equipment Pro Scratch 1 gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 28
 
12. Using the Built In Sampler:
Your Pro Scratch 1 comes with a built in sampler. You may store up to three samples on the three FLASH
BUTTON (6). Your sample can be a maximum of 6.5 seconds in length. A sample can be recalled while a CD is
playing, while the CD drive is in PAUSE MODE, or even without the CD in the player. You may play your sample
at anytime without music interruption. If you play your sample when the unit is already in playback mode you
sample will over lap the current music source. You can also play your sample once or in a continuous loop. As
with cue points you may store a maximum of 128*3 sample per in a drives memory. The MEMORY BUCKET
(53) on the LCD DISPLAY (1) will approximate the remaining memory.
To create a sample:
1)Initialize a loop (see looping page 13). If your loop is longer than 6.5 seconds it can not be stored as a
sample and will stored as a Cue Point.
4) The red MEMORY BUTTON (7) LED will turn off, when your sample is locked
into memory.
5) At this point your sample has been stored into memory. The original loop you
used to create the sample will remain playing until the OUT BUTTON (18) is
pressed (Figure 26).
BASIC OPERATIONS (CONT.)
American DJ® AUDIO • Pro Scratch 1™ INSTRUCTION MANUAL • PAGE 15
2) Press the MEMORY BUTTON (7). The
MEMORY CUE BUTTON (1) Red LED will
glow indicating memory is ready to be stored.
3) Select one of the three FLASH BUTTON
(6) you wish to store your loop in and press
that button.
Figure 25Figure 24
Figure 26
6) Your sample can now be recalled at any time even
when the unit is in PAUSE MODE. To recall the
sample be sure the sample function is on, by pressing
the SAMPLE BUTTON (8) until the red sample
button LED turns on. To play your sample in a
continuos loop leave the sample function on. To play
your sample just once, turn the sample function off
immediately after initiating your sample. With the
sample function on the sample will continue to play
until the sample function is turned off.
American DJ
¤
88
00
:
00 00
160
EFFECT ELAPSED
SINGLE
TOTAL REMAIN
CUE
T M S F
CUE BPM
BEAT SYNC.
AUTO
18
LOCK
LOOP
RELOOP
PITCH
.
--
KEY
BPM
PROGRAM
NONSTOP
1 2 3 4 5 6 7 8 9 0
--
FLASH 1 FLASH 2 FLASH 3
DIGITAL TURNTABLE
Pro-Scratch1
CUE
REV FWD
S
c
r
a
t
c
h
SEARCH
FX
MIX
MEMORY SAMPLER
TRACK
DISC IN/OUT SLOT
BOP
ENTER
SAMPLE PITCH
PITCH BEND
PITCH CONTROL
8%/12%/16% ON/OFF
ON/OFF
SGL/CTN
ON/OFF
HOLD
FLANGER/
ECHO
TRANS/
PAN
SCRATCH/
FADE
SKID/COAST PARAMETER
EJECT/
STOP
PROFESSIONAL CD PLAYER
POWER
ON
OFF
RELOOPOUTIN
SEAMLESS
LOOP
7) Important Notice: If you try to activate your sample without
turning the sample function on, the Flash button (6) will act as
cue points!
Figure 27