0

Out of 0 Ratings

Owner's of the Polycom Power Supply BPX100 gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 50
 
SpectraLink Corporation NetLink e340/h340/i640 Wireless Telephones and Accessories User Guide
Part Number: 72-1004-01-J.doc
Page 29
NetLink Desktop Chargers
NetLink e340 Wireless Telephone NetLink i640 Wireless Telephone
In DCE100 Desktop Charger in DCX100 Desktop Charger
Overview
The NetLink Desktop Charger is a one-slot charger available in two
models. Model DCE100 is designed to charge the NetLink e340
Wireless Telephone with the BPE100 Battery Pack or the NetLink
h340 Wireless Telephone with the BPN100 Battery Pack. Model
DCX100 is designed to charge the NetLink i640 Wireless
Telephone with the BPX100 Battery Pack. The models are not
interchangeable.
Full charging is accomplished in approximately one and a half
hours.
Set up the Desktop Charger by first obtaining the appropriate
SpectraLink power supply for the country or region. Place the
Desktop Charger on a flat, horizontal surface. Plug the power
supply into the Desktop Charger and into an appropriate wall
outlet.
The user must end any call in progress by pressing the End Call
button on the handset before placing the handset into the Desktop
Charger. The handset may be off or in standby mode during
charging.
Indicator light
Place the NetLink Wireless Telephone into the Desktop Charger
slot facing forward. If the handset is placed correctly, the red
indicator light will come on. The indicator light will not come on
when the slot is empty, when the NetLink Wireless Telephone is
improperly seated, or when the Desktop Charger has no power
applied.
Charging indicator
While the handset is charging in standby mode, it will display its
extension number and Charging…. The battery icon will show
charging progress. The handset is fully operational and will ring if
called. When the handset is charging while turned off, only
Charging… will display and no calls will be received. The dots will
be racing during the charging cycle. It is normal for the Battery Pack
to become warm when charging.
Charge Complete
When the handset is fully charged,
Charge Complete will display.
The indicator light will remain on until the handset is removed.