3Com Security Camera Network Video Server User Manual

0

Out of 0 Ratings

Owner's of the 3Com Security Camera Network Video Server gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 105
 
Network Video Server User’s Manual
Seyeon Tech Co., Ltd
48
6 Tx Module Registration(NVCP)
) Notice
- If you do not connect FlexWATCH
TM
server to NDVR server, do not set TX module
configuration
- Once Tx Module configuration is done, set up RX module configuration in the
NDVR server as well
Video proxy function is supported by NDVR server such as FW-5440 and FW-5000 server.
By registering FlexWATCH
TM
video server into NDVR server, live video can be recorded in
the NDVR server and live view can be accessed through NDVR server web page which
means user does not need to separately run web browser to view respective cameras
from FlexWATCH
TM
video servers.
TX module registration is to set up the FlexWATCH
TM
server to communicate with FW-
5440 or FW-5000 NDVR server or FW-VSS Proxy Server only. When TX module is enabled
at the FlexWATCH
TM
server, RX module at NDVR server side should also be enabled as
well.
Two different modes are provided as a connection type. One is Passive and the other is
Active mode. Depending on which device tries to establish the connection to the other
party, the connection type will be decided.
Passive mode : NDVR server tries to establish connection to FlexWATCH
TM
server
Active Mode : FlexWATCH
TM
server tries to establish connection to NDVR server
Once connection type is decided in the FlexWATCH
TM
server, the connection type in the
NDVR server should be opposite so that it can communicate with FlexWATCH
TM
server.
For example, once Passive mode is set up in the FlexWATCH
TM
server, Active mode must
be set in the NDVR server.
- INTPLUS [2005] -

   Find Your Products By Category