0
Owner's of the 3Com Security Camera Network Video Server gave it a score of 0 out of 5. Here's how the scores stacked up:
Network Video Server User’s Manual
Seyeon Tech Co., Ltd
59
of the FlexWATCH
TM
server.
Local IP address and Remote IP address is virtual IP address which is used at the time of
Modem connection only
Local IP address :
System default IP address (192.168.2.1) resides in the FlexWATCH
TM
server for modem
connection only. So when you connect the FlexWATCH
TM
server from remote PC using
dial-up networking and physical connection is made, you need to run your web browser
and enter this system default IP address(192.168.2.1) to view live video. You can
change this system default IP address as well. But it is recommended not to change
system default IP address for modem connection to prevent any possible error.
Remote IP address :
IP address which is automatically given to remote client PC by FlexWATCH
TM
server when
FlexWATCH
TM
server is connected by remote client PC using dial-up networking. This IP
address (192.168.2.2) is for data communication between FlexWATCH
TM
server and
Remote client PC. So you do not need to change this IP address. But if you change
default IP address of FlexWATCH
TM
server (192.168.2.1) for modem connection to
different class of IP address, you need to change remote IP address to the same class
of IP to match the IP class.
) Note that when Local IP address is change, remote IP address should be
changed into the same class of the IP address.
5 Service Path
This is to specify service path through which server can send any information to target
device.
1) Go to Service path menu in the service configuration mode
2) Select “Modem”, if any data should be sent through PSTN or external modem device
and click “Apply” button.
- INTPLUS [2005] -
Find Your Products By Category
Please Login
