0
Owner's of the Avaya Power Supply 106760804 gave it a score of 0 out of 5. Here's how the scores stacked up:
Chapter 12
12-10 Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
network
Command Mode RIP Router Configuration.
Description Enables RIP routing on a network or networks. The no form of this
command disables RIP routing.
Syntax
Sample Output The following example enables RIP on the 11.0.0.0 subnet which is
connected to the 11.0.4.5 interface:
(configure router:rip)# network 111.0.4.5 0.255.255.255
Systems P550R, P580, P880, and P882.
To Enable: network <ip-addr> [<wildcard-mask>]
To Disable: no network <ip-addr> [<wildcard-mask>]
Table 12-8. Parameters, Keywords, Arguments
Name Definition
<ip-addr> IP address of the network of directly connected networks.
<wildcard-
mask>
The inverse of a network mask. Enter a 32-bit number in four-
part, dotted decimal format. Place ones in the bit positions that
you want to mask.
This parameter specifies a range of IP addresses. For example,
to specify all IP addresses in the 10.10.70 subnet, enter
10.10.70.0 0.0.0.255.
Find Your Products By Category
Please Login
