0

Out of 0 Ratings

Owner's of the Avaya Power Supply 106760804 gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 764
 
Index
IN-12 Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
show ssl certreq 27-5
show ssl ciphers 27-7
show ssl config 27-7, 27-8
show startup-config 30-69
show system fans 22-2
show system power 22-3
show system ram 22-4
show tcp configuration 11-63
show temperature 31-6
show time zone 30-70
show udp statistics 11-66
show username 32-22
show utilization results 30-71
show utilization settings 30-72
show version 30-73
show vtp-snooping configuration 33-10
SNMP commands
hostname
30-44
ip igmp query-max-response-time 9-8
snooping
CGMP
10-12
snooping statistics
clearing CGMP
10-3
SNTP
show sntp
30-68
Spanning Tree commands
set port edge admin state
21-15, 28-2
set port point-to-point admin status 21-33,
28-3
set port spanning-tree-mode 28-4
set port spantree force-protocol-migration 28-5
set port spantree priority 28-7
set spantree 28-9
set spantree config 28-11
set spantree default-path-cost 28-12
set spantree fwddelay 28-14
set spantree hello 28-16
set spantree hold-count 28-17
set spantree maxage 28-18
set spantree portcost 28-20
set spantree priority 28-23
set spantree version 28-25
show spantree 28-26
show spantree blocked 28-28
show spantree config 28-29
show spantree port 28-30
show spantree version 28-32
ssh 26-4
SSH commands
clear ssh
26-2
ip ssh 26-3
show ssh 26-7
ssh 26-4
ssh keygen 26-5
ssh timeout 26-6
ssh keygen 26-5
ssh timeout 26-6
ssl backcert 27-9
ssl certreq 27-10
ssl restart 27-11
ssl selfcert 27-12
SSL/HTTPS commands
ip https
27-2
show ssl cert 27-3
show ssl certreq 27-5
show ssl ciphers 27-7
show ssl config 27-7, 27-8
ssl backcert 27-9
ssl certreq 27-10
ssl restart 27-11
ssl selfcert 27-12
static client ports
removing from intelligent multicast
10-8
static session 10-37
statistics
LGMP client
10-10
udp 11-66
viewing CGMP 10-31
viewing LGMP 10-39
Switch Fab commands
set fabric configure-redundant-hardware
29-2
set fabric enable-redundant-element 29-3
set fabric toggle-active-controller 29-4
show fabric status 29-5
Switch IP commands
show arp
11-53
show ip route 18-2
System commands 30-1
boot system flash 30-4
copy (running-config) 30-13
copy (startup-config) 30-14
copy (tftp) 30-15
copy running-config 30-20
copy running-config startup-config 30-21
copy running-config tftp 30-22
copy startup-config 30-23